Quick Installation Guide

- 1 -

PMAX-0208 Quick Installation Guide [V190218]

PACKAGE CONTENTS

The carton should contain the following items:

 Housing

 Bracket

 Screw Pack

Camera Screws

Bracket Screws

Wall Screws

Screw Wrench

If any item is missing or damaged, please contact your local reseller for replacement.

Note:

 The images in this Quick Installation Guide are for reference only. Actual housing and cameras may vary.

 This installation should be completed by a qualified installer and should conform to all local codes and

regulations.

MOUNT CAMERA

1. Open the housing using the bundled wrench, then slide out the camera tray.

2. Install the camera and secure the camera by fixing a screw using any of the allotted bottom holes.

Camera placement

PAGE 1
PMAX-0208 Quick Installation Guide [V190218] PACKAGE C ONTENTS The carton should contain the following items:  Housing  Bracket  Screw Pack Camera Screws Bracket Screws Wall Screws Screw Wrench If any item is missing or damaged, please contact your local reseller for replacement. Note:   The images in this Quick Installation Guide are for reference only. Actual housing and cameras may vary.
PAGE 2
3. Connect the cables and adapt proper waterproof cabling protection. I NSTALLATION 1. Align the bracket on the wall, then mark and drill the holes.
PAGE 3
2. Insert the expanding wall screws into the drilled hole on the wall. 3. Attach the bracket. 4. Screw the washers and nuts to complete bracket installation.
PAGE 4
5. Attach housing to the bracket.