User`s manual

Installing the Windows OS
1
Appendix C
Installing the Windows OS
After all the hardware has been installed, you must rst congure Intel South Bridge
RAID settings before you install the OS and other software drivers. To install the
Linux OS or to congure RAID settings, please refer to the OS Installation or RAID
Conguration User Guides posted on our web site at www.supermicro.com/support/
manuals.
C-1 Installing the Windows XP/2000/2003 OS for
systems with RAID Functions
Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the 1.
system will start booting up from CD.
Press the <F6> key when the message-" Press F6 if you need to install a 2.
third party SCSI or RAID driver" displays.
When the Windows XP/2000/2003 Setup screen appears, press "S" to specify 3.
additional device(s).
Insert the driver diskette-"ITE RAID XP/2000/2003 Driver for IDE" into Drive 4.
A: and press the <Enter> key.
When the Windows XP/2000/2003 Setup screen appears, press "S" to specify 5.
additional device(s).
Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH9R into 6.
Drive A: and press the <Enter> key.
Select the Intel(R)82801GR/GH 7. SATA RAID Controller from the list indicated
in the XP/2000/2003 Setup Screen, and press the <Enter> key.
Press the <Enter> key to continue the installation process. (If you need to 8.
specify any additional devices to be installed, do it at this time.) Once all
devices are specied, press the <Enter> key to continue with the installation.
From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The 9.
XP/2000/2003 Setup will automatically load all device les and then, continue
the Windows XP/2000/2003 installation.