User`s manual
4-4
X7DCA-L User's Manual
Type
This option allows the user to select the type of IDE hard drive. Select Auto to
allow the BIOS to automatically congure the parameters of the HDD installed
at the connection. Select User to allow the user to enter the parameters of the
HDD installed. Select CDROM if a CDROM drive is installed. Select ATAPI if a
removable disk drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the device installed
in the slot specied in the LBA mode. The options are Enabled and Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data transfer.
The options are Enabled and Disabled.
Transfer Mode
This option allows the user to set the transfer mode for the slot specied. The
options are Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/
DMA1 and FPIO4/DMA2.