User manual

www.acti.com
MobileGo!
10
PTZ Camera Configuration
For PTZ function, you will also have to configure it for each PTZ camera manually. Please
follow the instruction below and configure it through the following steps.
Step1: Please enable PTZ function in NVR for each PTZ camera. And please make sure PTZ
function work in NVR with proper settings.
Step2: Please go to Media Server folder
“C:\Program Files\ACTi\Mobile Server\Media Services\config\device\”, and open
MediaSourceConfig.xml file with Notepad. We are going to edit the settings of PTZ camera in
this file.
Fig. 5 Configuration file
Step3: After opening it, you will see the file as below. What we are going to do now is to
change the settings to what settings PTZ camera currently has. We will need you to find those
settings in NVR and write them back to MediaSourceConfig.xml file.