User manual

www.acti.com
Mobile Server
9
Step 3 – Install and Configure Mobile Server
Execute the file „Mobile Server.msi’ in the same PC.
After it is installed, you have to configure IP address and ports to let web clients access to
Mobile Server. There is one file under NVR folder that you have to edit:
C:\Program Files\NVR\IPControlCenter\m\config.xml.
Please open this file with Notepad and you will see the content as below.
Fig. 3 Configurations of Mobile server
Please follow the instructions to modify parameters according to the settings of your NVR
server.
(1) Media Server
Fig. 4 Media Server URL
 < URL Path>:
The URL Path consists of the address and port of Mobile Server.
- IP: Please modify URL path to the IP address of Mobile Server.
- Port: Mobile Server uses default port 90 to send video stream to web
client.
For example, if the PC which you install mobile server has the IP address
220.228.146.22 and the media server uses port 90, then you should use
http:// 220.228.146.22:90 as its URL path.
Mobile Server IP address or domain name
NVR Server IP address
Mobile server is installed
on NVR server PC, and
therefore NVR server is
considered as “Local
host”. Please leave it as
“127.0.0.1”.
Mobile server can be
connected either through
LAN or WAN. Please
assign an IP address
provided by the network
interface card of the PC.