User manual

www.acti.com
Mobile Server
11
Step 4 –Configure PTZ Camera Settings (if needed)
To use PTZ functions on client (browser or MobileGo!), you will also have to configure it for
each PTZ camera manually. Please follow the instruction below and configure it through the
following steps.
1. Please enable PTZ function in NVR for each PTZ camera. And please make sure PTZ
function work in NVR with proper settings.
2. Please go to Media Server folder
“C:\Program Files\ACTi\Mobile Server\Media Services\config\device\”, and open
MediaSourceConfig.xml file with Notepad. We are going to edit the settings of PTZ camera in
this file.
Fig. 6 Configuration file
3. After opening it, you will see the file as below. What we are going to do now is to
change the settings to what settings PTZ camera currently has. We will need you to
find those settings in NVR and write them back to MediaSourceConfig.xml file.