User manual

www.acti.com
MobileGo V2.0.51
14
Manually Trigger DO Function
You may manually trigger a digital out device via MobileGo live view screen control, once the
camera supports DO device, the DO icon will appear on bottom of the channel screen.
By tapping on the icon, the DO control panel will reveal.
On the DO control panel displays two DO trigger buttons: DO1 and DO2. The DO button will
become enabled if the camera supports, and vice versa.
To trigger a DO:
1. Tap once on a DO trigger button, the button will turn from inactivated state to activated
state.
2. Tap again to bring it back to inactivated state.
3. To close the DO control panel, tap on the DO icon
Note: Please always test the manual trigger function on NVR interface before you execute it
via MobileGo.
Note: This function is only supported for devices on NVR 3.0 server via MobileGo.
1
Activated
Inactivated
Not
supported
by camera