User Manual

www.acti.com
KCM-5211E Hardware User’s Manual
17
• Network
Protocol & Service
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS,
NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Pelco-D
Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector
Security
IP address filtering; HTTPS encryption; Password protected user levels;
IEEE 802.1X network access control
• Alarm
Alarm Trigger
Video motion detection 3 regions in single view mode,
1 region each in 4 cropped VGA mode; External device through digital input
Alarm Response
Notify control center; Go to Zoom preset point or preset tour; Change
camera settings; Command other devices; E-mail notification with
snapshots; Save video or snapshot to local storage; Upload video, snapshot
to FTP server; Activate external device through digital output
• Interface
Digital Input 2, terminal block
Digital Output 2, terminal block
Serial Port RS-485, RS-422, terminal block
Local Storage MicroSD/SDHC memory card slot (card not included)
• General
Power Source / Consumption PoE Class 3 (IEEE802.3af) / 9.12 W (IR on)
DC 12V / 11.52 W (IR on)
Weight 1350 g (2.98 lb)
Dimensions (W x H x D) 115.20 mm x 130.59 mm x 195.00 mm (4.50” x 5.10” x 7.70”)
Operating Temperature -30°C ~ 50°C (-22°F ~ 122°F)
Operating Humidity 10% ~ 85% RH
Approvals Camera: CE, FCC, IP66; Adapter: CE, TUV-GS, UL, RCM, CCC
• Integration
Unified Solution Fully compatible with ACTi software
ISV Integration Software Development Kit (SDK) available
Firmware Access Browser Microsoft Internet Explorer 6.0 or newer