User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
75
device. The default value is 6002.
 HTTP Port: Please enter the port number that is set for the device to use
HTTP protocol.
 Control Port: Please enter the port number that is used to control the device.
The default value is 6001.
 : Open the camera firmware page.
Video Quality
Fig. 84 Setup – Device – Video Quality
 Resolution: The video resolution of the IP device
 Frame Rate: The frame rate of the video streaming
 Compression: The compression type of the video
 Video Quality: The video quality of the video