User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
68
a disk is damaged or removed, you can replace that single disk, and shut off then power on to
start RAID rebuilding. The system will automatically reconstruct that damaged disk from the
data remaining in other hard drives. Your operation will not be affected during the rebuild.
Device Pack
The supported device list is continuously upgraded. You may periodically download the latest
Device Pack and upload to SNVR via web interface. This will refresh the support list to the
latest version.
Fig. 76 Setup – System – Device Pack
Firmware Upgrade
If you need to upgrade the firmware, please come to this page to upgrade.
Please click „Select‟ button to browse and find your .img file, then click “Upgrade” button to
upload the file. You can check the current firmware version in the System→Information.
Fig. 77 Setup – System - Firmware Upgrade