User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
66
Block List
If user wants to block/unblock certain IP to allow/forbid it to access the device, enter the
information here or remove it from IP Address list. After setting up, please click „Save‟ button
on the bottom right side to save the settings.
Fig. 74 Setup – System - Block List
 Block a IP address
When you wish to block any IP, please enter IP address as below.
If you wish to use Netmask, please click the check box to enable this function and enter
the Netmask as below.
After finishing the settings, please click „Add‟ button to add into list.