User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
65
Network
Every GNR has two network interface cards. Please click the tag „Ethernet 1‟ or „Ethernet 2‟ to
select the interface card that you wish to set up. The selected card will be highlighted in
orange.
We suggest user connect one to LAN and connect the other to WAN. After setting up, please
click „Save‟ button on the bottom right side to save the settings.
Fig. 73 Setup – System - Network
 DHCP
If you would like to use DHCP to assign IP, please click the check box to enable DHCP.
 Static IP
If you wish to assign one specific IP, please fill up all the fields.
1. Fixed IP Address: Enter the IP address you wish to set on the device
2. Subnet Mask: Enter the subnet mask you wish to set
3. Default Gateway: Enter the default gateway you wish to set
4. HTTP Port: Enter the HTTP port you wish to set.
5. Primary DNS Server: Enter the primary DNS server you wish to set
6. Secondary DNS Server: Enter the secondary DNS server you wish to set. This field
may be left empty.
DHCP
Static