User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
32
2. Reconnect: Disconnect and reconnect the camera connection.
3. Disconnect: Disconnect the camera connection.
4. Optical PTZ: Please refer to the PTZ control section.
5. Manual Record:. In default, clicking Manual Record will automatically record a 5-minute
stretch from this camera. This is useful if you find something you wish to take note of..
You may do following changes according to your needs:
(1) Setup – Schedule to set the Pre-Event and Post-Event Buffer.
(2) Setup – Settings – Global Settings to set Manual Record duration.
6. Snapshot: You may copy a snapshot of the “Live View” to your clipboard.
7. Digital Output 1: Manually start and end digital output 1 from this device.
8. Digital Output 2: Manually start and end digital output 2 from this device.
9. Audio In: Enable and disable your audio input.
10. Audio Out: Enable and diable your audio output.
Note: All functions from the “Right-Click Context Menu” work only on the single channel you
have chosen.
Side Panel
The “Side Panel” is divided into four panels as shown below.
Device List
The Device List shows the devices in your system and their status. You may organize the view
in many ways.