User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
29
Device
You can add devices into standalone NVR system in this stage with the following steps:
STEP 1: Search current available devices by using the drop-down menu on the top of the
page.
Fig. 21 Adding Device during Setup Wizard
You can choose your searching target then press “search” button, and the system will search
all related device for you.
STEP 2: Choose the device you want in the device list under search bar; selected device will
be highlighted in yellow.
STEP 3: Press “Next” button to add these device into device list and start to use ACTI
standalone NVR.