User`s manual

www.acti.com
GNR-2000 User’s Manual 1.01.04
22
Setup Wizard
Once you connected to Standalone NVR, Setup Wizard will guide you through the initial setup
process. The setup wizard will also show up if you delete all devices from device list in the
future. You may click “Previous” or “Next” button located to the lower right at any time. This will
skip the current step so that you may come back to it later. All the settings in the setup wizard
are available in the Setup tab from Standalone NVR web interface.
Fig. 14 Setup Wizard Welcome Screen