Specifications

www.acti.com
ENR-1000 Series System Administrator’s Manual
19
Reset to Factory Default
By resetting this device, all your system settings will return to factory default, while the
previous recording files are still kept on storage disks. It is strongly recommended that you
back up previous settings with Backup function
before resetting to factory default.
1. To begin, please turn off the device first.
2. Press down the Power Button to boot up
the device, immediately press and hold the
Reset Button with a pin or clip, the orange
System LED will light up for about 2~3
seconds, and you may release the Reset
Button as the orange light is off. The device
will then start the resetting process.
After the device automatically reboots, the resetting process is done and you may log in.
LED Indicators
The LED indicators on front panel show the current device status:
Item
Indicator Status
Light Color
Description
Power LED
Solid
Blue
The device power is on.
System Status
LED
Lights up for three
seconds after Reset
Button is pressed
Red
The system resetting process is
initializing.
Solid
The system service is running.
HDD LED
Flashing
Green
The hard disk is in activity.