Specifications

www.acti.com
ENR-1000 Series System Administrator’s Manual
106
2. Save to a Preset Point
On Preset Point list, select an ID, input the point name
and click
After a point is saved, click next to its name to go
to this point.
To delete this point, click
Configure PTZ Preset Tour
Preset Tour is a preconfigured PTZ sequence that directs the camera to cycle through
multiple preset points, including where to look and how long to look at each location. With this
preset tour, your PTZ device can perform an automatic patrol to scan through your cared
areas.
Before setting up Preset Tours, please make sure you have configured PTZ settings and set
PTZ Preset Points. To start:
1. Go to Setup page  Camera tab, select a PTZ camera from All Cameras list, and click
Preset Tour.
2. Select a tour from Tour1~Tour32, input its Name, pick a preset point, define its Dwell
time and click “Add”, this preset point will be added to the tour. Continue to add other
preset points in your desired movement sequence and click “Save”. After a tour is saved,
it is available on Live pagePreset Point control panel.
1
2
3
1
2
4
3
5