Installation guide

www.acti.com

ENR-1000 System Administrator’s Manual

Upgrade Firmware

You may check ACTi corporate website for latest ENR firmware package and download it.

Unzip the package and save the *.upg file to a USB disk and Insert it into ENR USB port.

1. On Live View screen, right-click to bring up Live View menu  Select “Setup Menu”

 click Maintenance tab  select “Firmware Upgrade”.

2. Click “Browse” , find the target *.upg file and click “Open”.

3. Click “Upgrade”.

During upgrading, the system will stop every

other activity including recording and event

handling. The system will auto-restart after

the upgrading completes.

Please be noted that after upgrading has started, DO NOTcut off the system power or

eject the USB disk until ENR restarts.