Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
49
“Enable” to enable this function. Input the duration time and times of the Beep. Click “OK” to
confirm.
Enlarge
Live View screen will display certain channel view in full screen for a while when the system
is triggered. On Enlarge tab, check the “Enable” to enable this function. Select the camera
whose live view will be enlarged on Live View screen and the duration time. Click “OK” to
confirm.
3. After configuring the event handling rules, on Event Management tab, input the
for all the rules you set for certain camera. Dwell Time
defines, after an event occurs, the period of time during which the same event will not
be triggered again.
4. On Event Management tab, click “Save” to save the settings.
Clear Event Rules
On Event Management tab, you may select an event rule under certain camera, and click
“Clear” to delete it, or “Clear All” to deleta all the rules belong to this camera.