Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
48
“Subject” field and mail body in “Body” field, then choose to attach a snapshot of which
camera from Attach snapshot dropdown list. Clik “OK” to confirm. Please note that if you
want to attach a snapshot to the notification email, make sure your local display stays no
Live View screen during the event handing period, in this way, ENR can tale the
snapshots for motion events.
To enable this service, you have to configure the Email setting ( please refer to Email
Settings on page 39) before this trigger is enabled.
Go to Preset
For the use of PTZ camera features to make responses toward certain triggers, please
cinfigure the preset points ( refer to PTZ settings) On Live View screen before you set the
event rule.
On Go to Preset tab, check the “Enable” to enable this function (if there is no PTZ camera
exsiting in ENR server to execute a PTZ response, a yellow warning sign would appear on
the tab , please cinnect a PTZ camera). Select which PTZ camera in ENR
server to make the movement, then the preset points and duration time between them. Click
“OK” to confirm.
Beep
ENR device can play Beep sound upon being trigger by events. On Beep tab, check the