Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
42
Format Hard Disks
You may execute disk formatting toward a newly-installed disk. You should follow the
installation procedures ( refer to Install the Hard Disks on page 16 ) to format the disks
before ENR system start carrying out the surveillance task, for a disk that is not formatted
to ENR file system format is not ready for recording.
After the disk is installed and detected in Storage Device list, select it and click “Format”.
During normal operation, please DON NOT REMOVE ANY DISK FROM THE DEVICE, or it
might cause damage to the disks. You can only remove or install a disk when the device is
shut down.
If you have to format a disk having recording for a while, it is suggested that you export
important video and system log in advance.
Please note that the system will stop recording during the disk formation.