Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
39
Email Settings
ENR supports email notification for Event Handling sent through an SMTP server. To enable
this service, you will have to configure the SMTP mail settings in advance. In order to reach
out to an SMTP server, your network cable should go through ENR LAN 2 port which
communicates with a network other than ENR local network.
1. On Live View screen, right-click to bring up Live View menu  Select “Setup Menu”
 click “Email”.
2. Fill in every field according to the detailed instruction in the table below.
3. Click “Send Test Mail” to send a test mail to this email account. If the test mail is sent
successfully, the dialog box below will pop up, which means your ENR server is ready
to send out email notifications when being triggered by an event.
4. Click “Save” to save these properties.
Field Name
Description
Sender Email
Input the sender’s email address, should the same account you set for SMTP
server.
Server
Input the sender’s SMTP server address. Only alphabets, numbers, and the
1
2
3
4