Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
38
Date & Time
ENR provides three methods to synchronize the time setting; you can (1) manually set the
date and time, (2) sync with Time Zone or (3) synchronize with NTP server.
On Live View screen, right-click to bring up Live View menu  Select “Setup Menu”  click
“System Settings” tab  click “Date & Time”
Setup Manually
In Date & Time section, click the button that shows date and time information on it. On the
popped-out calendar, select the correct date and time, then click “OK”.
Synchronize with Time Zone
In Time Zone section, select your zone from the Time Zone drop-down list. If your time zone
falls in Daylight Saving Time area, you may check the box “Enable Daylight Saving Time”,
and then system time will automatically adapt itself to daylight saving time clock.
Synchronize with NTP server
In NTP Server section, fill in the NTP server IP or domain name in the NTP Server field, and
click “NTP SynC” to start synchronizing, and then click “Save” to save this setting.
1
3
2