Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
35
No
Function
1
8 directional arrow keys:
Click to pan or tilt the camera. ( only available for cameras with Pan/Tilt/
capability)
2
Pan/Tilt/Zoom speed:
Click to change the speed. Provided speed scale is from 1 to 5. (available
for cameras with Pan/Tilt/Zoom capability)
3
Zoom out (available for cameras with a controllable zoom)
4
Zoom in (available for cameras with a controllable zoom)
5
Near focus (available for cameras with controllable focus)
6
Far focus (available for cameras with controllable focus)
7
Start/Stop Preset Tour
Click to enter Tour mode, click “Stop” to return to View mode.
Before enabling a tour, you will have to edit and save the Preset Tour via
camera web configurator in advance.
8
Save a Preset Point
Click to enter Save mode, you may click a preset point to save current
view.
9
Previous / Next 32 Preset Points
10
Preset Point ID:
Click to go to this point.
3. Use buttons 1~6 on PTZ Panel to define a view, then click , and click the desired
preset point ID, this preset point will be saved to both ENR and camera.
4. To validate the settings, simply click the preset points to make sure they are showing
your desired view.
Tour mode View mode
Save mode