Installation guide

www.acti.com

ENR-1000 System Administrator’s Manual

As ENR supports only H.264 video compression format for live view, you can only add an

H.264 video stream into a channel.

Auto-Add

This is strongly recommended when only four required cameras have connected to the

system. ENR will look for every video stream, add them by itself and display them on the Live

View screen immediately.

Input the User Name and Password to access the camera (this user account must be the

root account) and click “OK”.

You will enter Live View screen after Auto Add is completed.

Note

If your camera is set to Dual Stream mode, Auto Add function will add only Stream 1; for a

4VGA or 6VGA Stream mode camera, all Stream 1 ~ Stream 4 will be added.

Note

ENR will synchronize with devices upon connecting to them. To make sure the settings on ENR

side are prior to and always overwrite those on camera sides, please check “Auto save ENR

settings into device upon connection”.