Installation guide

www.acti.com
ENR-1000 System Administrator’s Manual
17
Lock Disk
SATA-2 using
disk screws in
this sequence:
ABCD
Step 3 Install Disk SATA-1
Repeat Step1~Step3 to install Disk SATA-1 to the
upper bay. Remember to connect Disk SATA-1 with
SATA data cable 1 shown in the illustration in Step 2
Step 4 Install the Case Cover Back
Install the case in reverse
order of removal step (see
Step 2), slide the case
cover back until it clicks.
Lock the back panel and
then front panel with its
screws.
Disk SATA-1
Disk SATA-2