ENR-010P ENR-020P User Manual For V4.04.
ENR-010P/ENR-020P User’s Manual Legal Notice Disclaimer The information contained in this document is intended for general information purposes. ACTi Corporation shall not be liable for errors contained herein or for incidental or consequential damages arising from the furnishing, performance, or use of this manual. The information contained herein is subject to change without notice. Copyright Copyright ©2016 ACTi Corporation All Rights Reserved.
ENR-010P/ENR-020P User’s Manual Regulatory Compliance Information Federal Communications Commission Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ENR-010P/ENR-020P User’s Manual About This Manual Target Audience This manual is intended for End Users who execute security tasks such as monitoring ongoing activities in the building, patrolling secured zones, searching video data and managing alarms with use of ENR surveillance system. The reader is expected to own not only the basic operation skills but permissions to access major functionalities defined by the System Administrator.
ENR-010P/ENR-020P User’s Manual Table of Contents 1 Legal Notice 2 Disclaimer ................................................................................................ 2 Copyright ................................................................................................ 2 Trademarks............................................................................................... 2 Regulatory Compliance Information ......................................................
ENR-010P/ENR-020P User’s Manual 6 Remote Client Operation 35 Access ENR Server ............................................................................... 35 Monitoring .............................................................................................. 37 Playback……………………………………………………………………….45 6 www.acti.
ENR-010P/ENR-020P User’s Manual Introduction Product Overview ACTi ENRSeries (hereafter referred to as ENR) is a compact and reliable multi-channel standalone NVR. It features a stable embedded Linux operating system and capabilities of supporting mega-pixel resolution H.264 streaming, an HDMI output for local display, PTZ control, scheduled/event-triggered/event speed-up recording, event management, synchronized playback, time/event-based playback search and video bookmarks.
ENR-010P/ENR-020P User’s Manual 8 www.acti.
ENR-010P/ENR-020P User’s Manual At A Glance 9 www.acti.
ENR-010P/ENR-020P User’s Manual Power Button & Reset Button You can turn on/off the device with Power Button. Turn On the Device Switch the Power Button to “ON”, the Power LED will light up and turn solid red. Turn Off the Device As this unit is powered on, the Power LED and System LED are both lit, and the Power Button is in pressed state. To turn ENR off, please do the following: 1. On Live screen, click Setup Power tab, and click “Shutdown”. 2.
ENR-010P/ENR-020P User’s Manual Reset to Factory Default By resetting this device, all your system settings and system log will return to factory default. It is strongly recommended that you back up previous settings with Backup function and export the system logs before resetting to factory default. 1. To begin, switch the Power Button to “OFF” position to turn off the unit. 2. Press and hold the Reset Button with a pin or clip. 3.
ENR-010P/ENR-020P User’s Manual LED Indicators The LED indicators on front panel show the current device status: Item Indicator Status Light Color Description Power LED Solid Red The device power is on. LINK(System) LED Solid Green 12 The O/S is running. www.acti.
ENR-010P/ENR-020P User’s Manual Local Client Operation Log in to & out of ENR To log into ENR system for the first time, you will have to key in the account name and password in Login window. Please contact your system administrator for account and password information. Log In On Login window, click into the Account and Password fields to enter your account information. Log Out On Live screen, click on the Logout button. 13 www.acti.
ENR-010P/ENR-020P User’s Manual System Overview Main Screen Introduction ENR local interface is composed of two main screens: Live screen After logging in, you will enter Live screen. Live screen is the interface where you see the live streaming from your cameras and manipulate PTZ functions. Playback screen Click to open Setup Menu Enter Playback Where you can search the recordings, view the playback, put video bookmarks and export the video. 14 www.acti.
ENR-010P/ENR-020P User’s Manual Input Devices IN ENR system, a USB mouse is the required input device to do all the operations on user interface. All the input devices, including USB mouse, USB joystick and USB keyboard are ready to use when you connect them to ENR via USB 2.0 ports. The onscreen keyboards allow you to input characters without using a physical one. By clicking in a character field (e.g. Account or Server name) or number field (e.g.
ENR-010P/ENR-020P User’s Manual To disable the virtual keyboard if a physical one is already in use, on Live screen, click Setup System tab click “Keyboard”. Uncheck the box “Always shows software keyboard”. You may adjust other input devices’ settings by entering “Keyboard” or “Joystick”, and refer to System Administrator’s Manual for further details. 16 www.acti.
ENR-010P/ENR-020P User’s Manual Monitoring You can perform most live monitoring tasks on Live screen. ENR may display all live channels on the screen, or 1x1 single channel in succession automatically. Aside from keeping an eye on the video, you may also take snapshots, control PTZ cameras, start or stop manual recording on a selected channel. In this section, you will be given instructions on the said fundamental operations. To start, log on to the system first.
ENR-010P/ENR-020P User’s Manual Display Your Desired Camera View You can watch a desired camera view in 1x1 channel view by clicking on the camera name on Cameras list. You can click this button on Live Menu to display the selected view in its native aspect ratio. Enter Full Screen Mode You can hide the control panels by entering full-screen mode. On Live Menu, click this button to enter full-screen mode; on the bottom of full screen view, click “Exit Full Screen” return to normal display mode. 18 www.
ENR-010P/ENR-020P User’s Manual Apply a Customized View Layout On the View list is where you customize desired Views. A View profile contains the channel positions, layout style, full screen setting and sequence patrol setting. You can click on the desired View on View list.
ENR-010P/ENR-020P User’s Manual Take a Snapshot The image (at original resolution size) of current channel will be saved as jpg format onto the USB mass storage, named as “Channelnumber_yyyy-MM-dd-hh-mm-ss.jpg”. Please make sure the USB mass storage has already been connected to ENR unit. Start / Stop Manual Recording This function is useful when you need to record a specific video when no event recording or schedule recording is proceeding.
ENR-010P/ENR-020P User’s Manual Drag the lever on the Zoom Bar to adjust zoom level. -To zoom in, drag it up -To zoom out, drag it down Click on eight directional buttons to navigate the whole view. Note To take a snapshot of a layout containing all visible channels, select the desired layout and click on Live Menu. Manipulate PTZ Devices on PTZ Panel On Live screen, select a PTZ channel, the PTZ panel will become enabled. 1 2 21 www.acti.
ENR-010P/ENR-020P User’s Manual Click the tab to enter PTZ operation mode, and make make use of the device’s PTZ capabilities to define a view. D No A A B B C C E D E Function Eight-direction arrow keys Click to pan or tilt the camera (only available for cameras with Pan/Tilt/ capability). Pan/Tilt/Zoom speed Click to change the speed. Provided speed scale is from 1 to 5 (available for cameras with Pan/Tilt/Zoom capability).
ENR-010P/ENR-020P User’s Manual Manipulate PTZ Devices with Mouse Controls You may directly manipulate a camera’s PTZ movements on the channel view. Select channel and enter onscreen PTZ mode by clicking on “PTZ” the , a crosshair will appear in the middle, you mayu use the mouse to do the following PTZ operations: 1. To execute optical Panning and Tilting, click anywhere on the live window to allow the camera to move in that direction.
ENR-010P/ENR-020P User’s Manual Layout Patrol By performing the Patrol function, all the four channels can be displayed by 1x1 layout in turns. 24 www.acti.
ENR-010P/ENR-020P User’s Manual Understand Channel Status On Live screen, it is essential to observe the system status and events, since unexpected environmental factors or human behaviors may take place, and they might pose security threats to your site. The channel status icons display important camera status and motion alerts for you. Channel Status On top of each channel window displays certain status information of this device. 1.
ENR-010P/ENR-020P User’s Manual Understand Event Notifications On Live screen, the Event Panel displays the latest camera status alerts including digital input detection, motion detection, network loss, or network recovery. By clicking on the event notification card, you will be brought to the playback of this very event. 26 www.acti.
ENR-010P/ENR-020P User’s Manual Playback Playback is the service that processes recorded video clips. You may search by time. by event or the bookmarks you have set. Playback may include multiple-channel synchronized playback. Video clips may also be exported in either RAW or AVI formats. On Live screen, click on Live menu to enter Playback screen. Playback Screen Overview Upon entering Playback screen, you will enter 16-channel synchronized playback.
ENR-010P/ENR-020P User’s Manual To play back certain channels synchronizedly, please do the following: 1. Move your desired channels up. For example, you want to see Channel 1, Channel 5, Channel 9 and Channel 13 to be played at the same time in a 2x2 layout. Drag these channels to the top. You can play certain channel in 1x1 layout by double-clicking this camera on Camera list. 1 1 5 9 13 1 5 9 13 To restore all the channels back to their original positions, click this button. 28 www.acti.
ENR-010P/ENR-020P User’s Manual 2. On layout selection panel, select 1 5 9 13 2 Start Time Search If you know the specific time of the event, you may start from choosing the precise, date and the hour. 1. Click on the current-time indicator above the time bar 1 29 www.acti.
ENR-010P/ENR-020P User’s Manual 2 3 4 Recording exists No recording exists 2. Specify the date on the calendar. 3. Choose the hour from the 24-hour time bar. Special recorded events are indicated in different colors. Color Description Full-time or manual recording The camera’s video motion detection function had been enabled, and the camera detected motion events during this period. The digital input device (e.g. PIR sensor) connected with the camera detected motion events during this period.
ENR-010P/ENR-020P User’s Manual Event Search If you want to filter the recording by Event Type, you may perform an event search to locate the desired video footage. 1. Click on the “Event Search” button on Playback Menu. 1 2. On Event Search window, define the Search Time, Duration, Cameras and Event Type then click “Search”. 2 3. After the search is completed, click “Cancel” to close this window. 3 31 www.acti.
ENR-010P/ENR-020P User’s Manual 4. The search result will be displayed on the left. Click on an event to enter the playback in 1x1 view. Click the arrows to switch pages 4 List of events Play the Video Footage Use the buttons on Playback Control Panel to play your desired video footages. Go1.to present time Bookmark the selected time Reverse Play / Pause / Play Timeline scale Switch Play Speed Switch 32 www.acti.
ENR-010P/ENR-020P User’s Manual Add and Search Bookmarks You can bookmark a time position on the timeline by clicking on 1. on Playback Menu. Make sure the camera channels you desire to watch are all in display area. On Playback Menu, click on the “Bookmark List” button. 2. The bookmarks will be shown on the left, click any bookmark to go to the saved time position. 3. To delete a bookmark, simply right-click on it to being up the confirmation window, click “OK” to delete the selected bookmark.
ENR-010P/ENR-020P User’s Manual Take a Snapshot You can take a snapshot of current layout view containing all the currently displayed channels by clicking on Playback Menu, this image will be saved as jpg format onto the USB mass storage. Please make sure the USB mass storage has already been connected to ENR. If you want to get a snapshot of certain channel in its full resolution size, select the channel and click Export Video You may crop and export video of the selected channel to .avi or .raw file.
ENR-010P/ENR-020P User’s Manual Remote Client Operation Access ENR Server To log into ENR system for the first time, you will have to key in the account name and password in Login window. Please contact your system administrator for account and password information. Type in the IP address and port number directly into Internet Explorer. Sample IP will look like this: http://220.228.146.21:1000 or domain name http://enr.acti.com.
ENR-010P/ENR-020P User’s Manual Enter Account & Password ●Account (non case-sensitive): Your User Account ●Password (case-sensitive): Your User Password A To change UI language,1select the desired language from “Language” dropdown list. Change UI language Remember Login Information B To have the server remember your Account, Password and language setting for future, check “Remember me”.
ENR-010P/ENR-020P User’s Manual Monitoring You can perform most live monitoring tasks on Live screen. ENR may display all live channels on the screen, or 1x1 single channel in succession automatically. Aside from keeping an eye on the video, you may also take snapshots, control PTZ cameras, start or stop manual recording on a selected channel. In this section, you will be given instructions on the said fundamental operations. To start, log on to the system first.
ENR-010P/ENR-020P User’s Manual Select a Customized Layout You can switch you current view to another pre-set custom layout by clicking on the layout name. Watch a Specific Camera View To watch a certain camera view which is not in your current layout, double-click on it on Camera list, the new channel will be added to your current layout. 38 www.acti.
ENR-010P/ENR-020P User’s Manual Take a Snapshot You can take a snapshot of a current live channel by right-clicking on it and selecting “Snapshot”. This image will be saved to Clipboard. You have to open an image editing tool and use “CTRL+V” command to view this image. Manual Record To record the live stream of a channel, right-click on it and then select “Manual Record”. As the manual recording proceeds, a hand icon will appear right on this channel on Camera list.
ENR-010P/ENR-020P User’s Manual Trigger Digital Output You can trigger a digital output connected to a camera via remote client interface. Right-click on the channel and select the DO you want to trigger. Send Audio Signal to a Camera If a camera is connected with an audio-out device( e.g. a speaker), you can make use of the audio-in device ( e.g. a microphone) to send the audio signal to the camera side. To do this, right-click on the channel and select ”Audio Out”. 40 www.acti.
ENR-010P/ENR-020P User’s Manual Digital PTZ Navigation Digital PTZ allows you to zoom into part of the video and enlarge it to display on screen. This PTZ function is applied to every camera model. On the channel, click and drag a highlight rectangle over any channel, and the area highlighted will be displayed in the full live video window. In this mode, a picture-in-picture view will show in the lower right of live view window.
ENR-010P/ENR-020P User’s Manual Optical PTZ Navigation If this camera has optical PTZ feature, you can directly operate the PTZ movements on the channel. First, focus this channel on display area, - Use the mouse to do the following PTZ operations: ●To execute optical Panning and Tilting, click anywhere on the live window to allow the camera to move in that direction. The length of the direction indicator is proportional to the Pan and Tilt speed.
ENR-010P/ENR-020P User’s Manual Zoom in / Zoom out 8 directional buttons Focus Mode / Near Focus / Far Focus Pan Speed Zoom Speed Tilt Speed Note 1. The zoom buttons are only applicable for those devices supporting optical zooming. 2. The focus buttons are only applicable for devices with controllable zoom lens, e.g. KCM5211. Please remember to turn off the autofocus mode on device firmware before using these buttons. 3. Make sure PTZ mode appears as “Digital PTZ” on right-click channel menu.
ENR-010P/ENR-020P User’s Manual Start / Stop a Tour If the system administrator has previously defined certain PTZ tour, you can directly click on a preset tour button to have the camera execute the tour. To stop the tour, click on the “Pause” button. The executable preset tour buttons appears as buttons 1 below: 44 www.acti.
ENR-010P/ENR-020P User’s Manual Playback Playback is the service that processes recorded video clips. You may search by time. by event or the bookmarks you have set. Playback may include up to 4-channel synchronized playback. Video clips may also be exported in either RAW or AVI formats. On Live View screen, click to enter Playback screen.
ENR-010P/ENR-020P User’s Manual To play back certain channels synchronizedly, please do the following: 1. Select a layout. 2. Drag the desired camera channels from Camera list to the display window. 3. On Playback Control Menu, click to start playing. 2 3 1 Start Time Search If you know the specific time of the event, you may start from choosing the precise, date and the hour. 1. Click on the current-time indicator above the time bar. 2. Specify the date on the calendar, and click “OK”. 2 1 3.
ENR-010P/ENR-020P User’s Manual 3 When there are multiple events, you can use the event finder to jump to the previous or the next event directly. Previous Next Event Search If you want to filter the recording by Event Type, you may perform an event search to locate the desired video footage. 1. Scroll the time bare to your desired position. 2. Click on the “Search” button on Playback Menu. 2 1 47 www.acti.
ENR-010P/ENR-020P User’s Manual 3 3. On Search window, select the cameras and specify the event indicators for each camera and click “Search”. 4. The search result will be display on the Search Result panel. Click on an event to jump to the time spot. 4 Play the Video Footage Use the buttons on Playback Control Panel to play your desired video footages. Reverse Play / Pause / Play Click to change play speed 48 www.acti.
ENR-010P/ENR-020P User’s Manual Add and Search Bookmarks You can bookmark a time position on the timeline by clicking on Playback Menu. 1. Make sure the camera channels you desire to watch are all in display area and open the Bookmark list panel. 2. The bookmarks will be shown on the left, double-click on any bookmark to go to the saved time position. 3. To delete a bookmark, simply click on the “X” icon on the bookmark entry.
ENR-010P/ENR-020P User’s Manual Export Video You may crop and export video of the selected channel to .avi or .raw file. The provided exported video duration is from 1 minute ~ 60 minutes. 1. Drag the time bar to the start point of the footage, right-click on the time bar and select “Mark Export Start” 2. Drag the time bar to the end point of the footage, right-click on the time bar and select “Mark Export End” 3. Click on the Playback Menu. 3 1 2 4.
