User Manual

www.acti.com

Hardware Manual

Installation Procedures

This section describes procedures in mounting the camera on a flat surface.

NOTE: The camera images on this documentation are for reference only and may be different

from the actual camera.

Step 1: Prepare for Installation

1. Before installing the camera, prepare the additional accessories required for installation.

E9xx Models

E9xxM Models

 Exterior-grade Ethernet Cable with

RJ-45 connector (not included; can be

purchased from local stores)

 Bundled Cable Gland

 Exterior-grade Ethernet Cable with

Waterproof M12 Male Connector,

D-coding and PoE type A (not included;

can be purchased from local stores)

2. Depending on the material of the surface where the camera will be installed, it may be

necessary to drill the three (3) screw holes and use the supplied screw tox. In this case,

attach the bundled drill template on the surface and drill the screw holes.