Technical data

Diagnosis
Operating Manual
92ID 442281.00
WE KEEP THINGS MOVING
13
13.3.23 60-67:Application events 0-7
13.3.24 68: External fault
Resolution Level Response Fault counter
Application-specific or due to free pro-
gramming option; can be separately pro-
grammed for each axis
• Message/warning: Evaluation oc-
curs in 256 ms cycle.
• Malfunction: Evaluation occurs in
parameterized cycle time (A150)
Can be pa-
rameterized in
the U100,
U110, U120,
etc. up to
U170 system
parameters.
The parameterized malfunction reaction in the
A29 parameter.
Z60 to Z67
Possible cause Test Measure Acknowledgement
Application-specific or due to
free programming option; can
be separately programmed for
each axis
— — Switch the device on/off or
programmed acknowledge-
ment
Resolution Level Response Fault counter
Application-specific or by free program-
ming option; should be used for applica-
tion events that may only be
parameterized on the malfunction level.
Malfunction The parameterized malfunction reaction in the
A29 parameter.
Z68
Possible cause Test Measure Acknowledgement
Application-specific or
by free programming
option
— — Switch the device on/off or
programmed acknowledge-
ment