Technical data
Notes on Safety
Operating Manual
ID 442281.00
WE KEEP THINGS MOVING
9
2
2 Notes on Safety
The devices may cause risks. For these reasons, comply with the following:
• The safety notes listed in the following sections and points
• The technical rules and regulations.
In addition, always read the appropriate documentation. STÖBER ANTRIEB-
STECHNIK GmbH + Co. KG accepts no liability for damages caused by non-ad-
herence to the instructions or applicable regulations. Subject to technical changes
to improve the devices without prior notice. This documentation is purely a prod-
uct description. It does not represent promised properties in the sense of warranty
law.
2.1 Component part of the product
The technical documentation is a component part of a product.
• Since the technical documentation contains important information, always
keep it handy in the vicinity of the device until the machine is disposed of.
• If the product is sold, disposed of, or rented out, always include the technical
documentation with the product.
2.2 Operation in accordance with its intended use
In the sense of DIN EN 50178 (previously VDE 0160), the inverters represent the
electrical equipment of power electronics for the control of power flow in high-volt-
age current systems. They are designed exclusively to power asynchronous mo-
tors. Operation for purposes other than the intended use include the connection
of other electrical loads!
2.3 Risk assessment
Before the manufacturer is allowed to put a machine on the market, he must have
a danger analysis prepared as per machine guideline 06/42/EG. This analysis es-
tablishes the dangers connected with the use of the machine. The danger analy-
sis is a multi-stage, iterative process. Since this documentation cannot begin to
provide sufficient insight into the machine guidelines, please carefully study the
latest standards and legal situation yourself. After the drive controller has been
installed in machines, it cannot be commissioned until it has been determined that
the machine complies with the regulations of EG guideline 06/42/EG.