Technical data

Diagnosis
Operating Manual
ID 442281.00
WE KEEP THINGS MOVING
61
13
13.2 Display
The display gives the user a detailed response message on the state of the invert-
er. In addition to the indication of the parameters and events, the device states are
shown.
The display permits an initial diagnosis without additional aids.
13.2.1 General
After the self-test of the inverter, the operation indication appears on the display.
Depending on the configuration and the current device state, the first and second
line of the display may differ from what is shown in the example. Im Picture shows
the configuration fast ref. value in the device state enabled. See chap. 3 for device
states.
If no axis is active, this is indicated with an asterisk (*). The active axis is then
shown when it differs from axis no. 1. Only for active brake chopper or active
local mode does the appropriate symbol appear on the display.
Fig. 13-2: Display indication
13.2.2 Event Indications
Events
Event indications on the display give the user information on the state of the de-
vice. The event list (chapter 4.4.3) gives you a list of the event indications. The
following event groups exist.
Fig. 13-3: Events
3000 rpm 1.3A
4: Enabled
Brake chopper
active
Device state
Axis no. 2 active
CurrentSpeed
Events
Sequence error
recognized
by CPU
active
configuration
inactive
configuration