Technical data

Introduction

ID 442281.00

WE KEEP THINGS MOVING

Operating Manual

1Introduction

Axis management is integrated on the inverters. This offers the following operat-

ing modes:

• Single-axis operation:

An axis configured with POSITool is used on a connected motor.

• Multiple-axis operation:

Two, three and four axes configured with POSITool are used on a connected

motor. The axes can be used sequentially like parameter records on the mo-

tor.

This option requires the following system structure.

The system of the 5

generation of STÖBER inverters is divided into two areas –

the global area and the axis area. The global area contains the programming and

parameterization related to the inverter. This includes device control, the setting

of I/O components such as brake resistors and so on. In addition, it is responsible

for managing the axis area.

The axis area is divided into up to four axes. Each axis contains the programming

and parameterization for one motor and is addressed by the global area. The axis

area contains the motor setting and the application of the motor. The uses are de-

fined by STÖBER ANTRIEBSTECHNIK in so-called applications or, optionally,

can be programmed as desired by the user.

Fig. 1-1: Setup of global and axis area

1.1 Purpose of the manual

This manual provides you with information on the basic operation of the inverter.

Here functions in the inverter independent of the standard applications defined by

STÖBER ANTRIEBSTECHNIK are explained.

Axis 1

Global area Axis areas

Axis 2

Axis 3

Axis 4

ESC

I/O