Technical data

11
Communication between inverter and PC
ID 442281.00
WE KEEP THINGS MOVING
Operating Manual
46
When online mode is concluded with a partial reverse documentation, the data re-
cord is marked as reverse documentation and parameter values can no longer be
changed. The data record cannot be converted in a configuration or transferred
again to the inverter.
Utilizing memory space
When the configuration is loaded, the memory requirements of the data record
are compared with existing memory space on the inverter. If it is certain that the
data record can be stored, POSITool does not give you a message. If the expect-
ed memory utilization is 95 % or more, a message is indicated.
A memory utilization in this range occurs, for example, when you have defined too
many motion blocks and profiles in the motion block positioning application. Try
to optimize the configuration. Contact [e-mail] if you have ques-
tions.
Second case: Identical configurations
When POSITool determines that the configurations are identical, the dialog
screen shown in Fig 11-4 appears. When this happens, you have the following
choices:
• Load the parameters from POSITool to the inverter ( ) or
• Load the parameters from the inverter to POSITool ( )
Fig. 11-4: Establishing a connection for identical configurations