Technical data

Communication between inverter and PC

ID 442281.00

WE KEEP THINGS MOVING

Operating Manual

used. In this case, you can use the global settings of POSITool. The global pa-

rameterization takes place in the menu Extras/Options in the dialog screen Gen-

eral (see Fig. 11-2).

Fig. 11-2: Project settings

11.2 Online operation

There are three ways for a user to establish a connection between inverter and

PC:

• The button in the tool bar

• The area labeled Establish connection to inverter in the inverter entry under

Communication

• the F5 key

Both devices must have the same configuration and parameter values for a serial

connection between PC and inverter. If the user gives the command to go online

via one of the two ways, POSITool checks the configuration of PC and inverter.

During this check a differentiation can be made between two results:

• The configurations are different

• The configurations are identical