Technical data

7
Parameterizing brake data
ID 442281.00
WE KEEP THINGS MOVING
Operating Manual
38
Depending on how you parameterize it on assistant page holding brake, brake ac-
tivation is triggered by the system enable A900, a stop (setting of the signal
source in D102 Stop source or a quick stop command (setting of the signal source
in A62 Quick stop source).
Fig. 7-1: Parameterization of brake activation with a control mode without feed-
back (B20 = 0:V/f-control or 1:Sensorless vector control)
Status signals (only in application comfort reference value)
Signal Function Fieldbus
Image
Single
Parameter
Brake
released
The signal is 1:active when the brake is released. The signal be-
comes 0:inactive when the brake begins to be applied.
D201 Bit 2 D431
Brake
released
The signal is 1:active when the brake is applied. The signal be-
comes 0:inactive when the brake begins to be released.
D201 Bit 3 D432