Technical data

4
Parameterize
ID 442281.00
WE KEEP THINGS MOVING
Operating Manual
24
4.1 Parameters
Parameters perform various tasks in the inverter system:
• Adjust the application to external conditions (e.g., the motor type)
• Indicate the values (e.g. current speed or the torque).
• Trigger actions (e.g., "save values" or "phase test"
Parameters are allocated to the global area or the axis area.
4.1.1 Structure
The parameter structure is set up as shown in the adjacent example::
The axis code identifies an axis parameter when it is shown mixed with global pa-
rameters.
The group divides the parameters into functional characteristics.
The line distinguishes the individual parameters in a group.
The element subdivides a parameter (subfunctions).
Fig. 4-2: Parameterstruktur
The individual subject areas of the parameter groups are listed in the table below:
Parameter group Subject area / dependency
A.. Inverter Inverter, bus, cycle time
B.. Motor Motor
C.. Machine Speed, torque
D.. Reference value Speed ref. values, reference value generator
E.. Display value Indication for device and application
F.. Control interface Analog inputs / outputs,
binary inputs / outputs, brake
G.. Technology Depends on the application
(e.g., synchronous running)
H.. Encoder Encoder
I.. Positioning Only with positioning applications
J.. Process blocks Only with positioning application
motion block positioning
1.E250.2
Axis
(only for axis parameters)
Group
Line Element