Technical data

Parameterize
Operating Manual
ID 442281.00
WE KEEP THINGS MOVING
23
4
4 Parameterize
The user interfaces of the 5th generation of STÖBER inverters consist of several
elements with different functionalities (see figure).
To program a device system of the 5
th
generation of STÖBER inverters, the user
needs the POSITool software. With the POSITool software, either an application
defined by STÖBER ANTRIEBSTECHNIK or the option of a freely programmed
application can be used. POSITool provides a parameter list with which the appli-
cation can be adjusted. The software also has comprehensive diagnostic func-
tions.
Parameters can also be changed via the operator panel on the front of the invert-
er. It consists of a keyboard for calling the menu functions and the display for in-
dication. When appropriately programmed, the keyboard can be used to
implement functions such as manual operation or tipping. Response messages
on the device status are shown by the LEDs on the front.The display provides de-
tailed information.
Fig. 4-1: User interface
Display
LED
Oper.
panel
X3
1
1
,
Oper. indication
Device states
Events
Device states
Parameterize
Program
Parameterize
Diagnostic
P
S
o
T