Installation guide

www.acti.com
Installation Guide
4
Installation Procedures
The camera can be installed onto a corner using additional mounting accessories. The
accessories can be purchased individually or as an accessory set.
Mounting Solution
Required Accessories
Corner Mount with
Mounting Bracket
(SMAX-0005)
PMAX-0402 PMAX-1103
The installation steps vary depending on the preferred waterproof cabling solution. There are 3
ways to do the cabling:
 Installation Using the Corner Mount with Bracket and Sealant Tape, see page 5.
 Installation Using the Corner Mount with Bracket and Flex Conduit (Not
applicable for D3x Series), see page 10.
 Installation Using the Corner Mount with Bracket and Naked Cable (Not
applicable for D3x Series), see page 20.