Installation guide

www.acti.com

Installation Guide

Installation Using the Corner Mount with Bracket and

Flex Conduit

The D4x, E3x, E41, E41A, E42, E42A, E43, E43A camera series come with a bundled conduit

gland. Use the conduit gland with a 1/2"-size flex conduit (not included in the package) to protect

the Ethernet cable against fierce weather conditions. To use conduit with the camera, the

pre-installed network cable with "pigtail" (female connector) must be replaced with a standard

Ethernet cable.

NOTE: The flex conduit and Ethernet cable are not included in the package and must be sold

separately. When purchasing, make sure the flex conduit size is 1/2" to match the bundled

conduit gland.

To do the waterproof cable installation, also prepare the following tools:

 Screwdriver

 Pliers