Hardware Manual

www.acti.com

Hardware Manual

Step 5: Connect the Cable(s)

1. Connect the network cable to the Ethernet port of the camera.

2. If necessary, connect audio input/output or DI/DO devices to the camera. See How to

Connect DI/DO and Audio Devices (Optional) on page 16 for more information.

3. Connect the other end of the network cable to a switch or injector. Then, connect the switch

or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection

example below.

Network

AC Power

Source

PoE Injector /

PoE Switch

Power Cable

Ethernet Cable

(Data + Power)

Ethernet Cable

(Data)

Camera