User manual

2.12.3 Determining the Position of the Camera on the Bottom Plate
Once the outdoor wall mount has been mounted to the wall or pole, the camera
can be mounted to the underside of the bottom plate (item14). The bottom plate
closes off the outdoor wall mount from below and also holds the camera.
The upper side of the bottom plate has 24 holes for the M4 stainless steel hex
nuts (item20); it is thus possible to mount the camera in increments of 15 degrees.
In order to facilitate the mounting process, all holes have numbers from 1 to 8.
Three standard positions are identified as described below:
• PIR sensor of the camera looks straight ahead: Use
the holes marked by the number 1 for the M4 hex
nuts (item20).
• PIR sensor of the camera looks to the right: Use the
holes marked by the number 3 for the M4 hex nuts
(item20).
• PIR sensor of the camera looks to the left: Use the
holes marked by the number 7 for the M4 hex nuts
(item20).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
65/124
D12 Camera Manual Part 1
The bottom plate closes
off the outdoor wall
mount from below and also
holds the camera
PIR looking straight
ahead: 1
PIR looking to the right: 3
PIR looking to the left: 7