User manual

2.17.2 Cleaning the Lenses 80
2.18 Wiring, Fire Prevention, Lightning and Surge Protection 80
2.18.1 Wiring 80
2.18.2Fire Prevention 81
2.18.3Lightning and Surge Protection 81
2.19 Optional Accessories 82
3 OPERATING THE CAMERA 84
3.1 General Procedure 84
3.1.1 Establishing the Power Supply of the Camera 84
3.1.2 Connecting the Camera 84
3.2 Overview of the Configuration Settings 86
3.3 Connecting the Camera 88
3.3.1 Ethernet: Power Supply Using a Network Power Adapter (MX PoE) 88
3.3.2 Ethernet: Power Supply Using a Network Power Rack (MX PoE) 89
3.3.3 Ethernet: Power Supply Using PoE Products (Power over Ethernet) 90
3.3.4 ISDN: Power Supply Using a Network Power Adapter 91
3.3.5 ISDN: Directly Supplying Power Using the External Power Supply 92
3.3.6 Ethernet and ISDN 92
3.3.7 Camera Startup Sequence 93
3.4 The First Image from the Camera 94
3.4.1 Preparing the Ethernet Connection 94
3.4.2 Preparing the ISDN Connection 96
3.4.3 Simultaneously Using ISDN and Ethernet Connections (Gateway) 96
3.4.4 The First Image in the Browser 97
3.4.5 Additional Information 98
3.4.6 Camera Screens in the Browser 99
3.4.7 Access Using Zeroconf/Bonjour 100
3.4.8 The First Image in MxControlCenter (MxCC) 104
3.5 Starting the Camera With an Automatic IP Address (DHCP) 110
3.6 Starting the Camera Using the Factory IP Address 111
3.7 Connecting External Devices and Sensors: MX Interface Connector
and MOBOTIX Cam-IO 112
3.7.1 MX Interface Connector for Direct Connections 112
3.7.2 MOBOTIX Cam-IO: Expansion Module for Easy Installation 113
3.8 Signal Input/Output (RS232 Interface) 114
3.8.1 Signal Input 114
3.8.2 Signal Output 115
3.9 D12 Drilling Templates 116
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
3/124
D12 Camera Manual Part 1