Specifications

w w w . a c t i . c o m
MPEG - 4 IP VIDEO SOLUTION PRODUC TS
56
• Up to full D1 MPEG-4 video decoding at 30/25 FPS
• Supports both regular TV system and digital-TV
• QoS enabled (L2, L3) video streaming
(UniCast/MultiCast)
• Digital time code retrieved
• DDNS supported
Receive digital data and decode to analog image without loss of quality
The SEM-2110 is a high resolution, Ethernet (LAN and WAN) ready digital video decoding module. Via an
Ethernet network such as LAN or WAN, the SEM-2110 takes a MPEG-4 stream from a specic ACTi network
camera or video server, and converts it into real-time, high quality analog video signals. This allows analog video
devices such as TV system, analog monitors or existing analog video switches to be connected to an ACTi IP-base
video system.
SEM-2110
SoM-based QoS-enabled Real-time
MPEG-4 Video Transcoder Module
T r a n s c o d e r P l a t f o r m
Preliminary
Image System
Compression MPEG-4 decoding
Resolution
CIF (352 x 240 in NTSC, 352 x 288 in PAL)
Full D1 (720 x 480 in NTSC, 720 x 576 in PAL)
Image Frame Rate
30 fps at full D1 resolution (NTSC)
25 fps at full D1 resolution (PAL)
Network
Protocol Supported TCP, UDP, HTTP, PPPoE, DDNS,DHCP, IGMP
QoS Layer 2, 3
PRODUCT SPECIFICATION
Connector 1
Pin # Signal Pin # Signal
1 DC-12V-IN 2 DC-12V-IN
3 GND 4 GND
5 485 RX/TX LED 6 PWR LED
7 GND 8 GND
9 485 TX D+ 10 485 TX D-
11 GND 12 485 RX D+
13 485 RX D- 14 GND
15 LAN GND 16 LAN TX OP
17 LAN TX ON 18 LAN GND
19 LAN RX IP 20 LAN RX IN
21 LAN GND 22 WAN TX OP
23 WAN TX ON 24 WAN GND
25 WAN RX IP 26 WAN RX IN
27 WAN GND 28 GND
29 WAN LINK/ACT LED 30 LAN LINK/ACTLED
31 NC 32 NC
33 NC 34 Empty
Connector 2
Pin # Signal Pin # Signal
1 DI - 1 2 DI - 2
3 GND 4 RESET
5 GND 6 DO - 1
7 GND 8 DO - 2
9 GND 10 NC
11 GND 12 NC
13 A GND_Video 14 CVBS OUT
15 A GND_Video 16 Y / Y OUT
17 A GND_Video 18 Pr / C OUT
19 A GND_Video 20 Pb OUT
21 A GND_Video 22 A GND
23 A GND_PCM 24 MIC - IN
25 A GND_PCM 26 SPK -OUT
27 GND 28 WAN 10/100 LED
29 GND 30 LAN 10/100 LED
31 Empty 32 NC
33 NC 34 NC
Environment
Dimensions
(W x H x D)
26.1 mm x 131 mm x 88 mm
(1.03” x 5.16” x 3.46”)
Weight
350 g (0.66 lb)
Power
Requirement
12 V / 0.61 A / 7.3 W
Operation Temp. 5 °C ~ 50 °C (32 °F ~ 122 °F)
Humidity RH10 % ~ 90 %
Others
Security
Password/username protection for restricted
camera access
General Functions
• DI/O event triggered via remote Video Server
• Built-in Web Server and network interface
Client Software OS
Supported
Win 2000, Win XP, Win 2003