Specifications

w w w . a c t i . c o m
* All specications are subject to change without notice.
* All brand names and registered trademarks are the property of their respective owners.
55
• Up to full D1 MPEG-4 video decoding at 30/25 FPS
• Supports both regular TV system and digital-TV
• QoS enabled (L2, L3) video streaming
(UniCast/MultiCast)
• Digital time code retrieved
• DDNS supported
Receive digital data and decode to analog image without loss of quality
The SEM-2010 is a high resolution, Ethernet (LAN and WAN) ready digital video decoding module. Via an Ethernet
network such as LAN or WAN, the SEM-2010 takes a MPEG-4 stream from a specic ACTi network camera or
video server, and converts it into real-time, high quality analog video signals. This allows analog video devices
such as TV system, analog monitors or existing analog video switches to be connected to an ACTi IP-base video
system.
SEM-2010
QoS-enabled Real-time MPEG-4
Video Transcoder Module
T r a n s c o d e r P l a t f o r m
Image System
Compression MPEG-4 decoding
Resolution
CIF (352 x 240 in NTSC, 352 x 288 in PAL)
Full D1 (720 x 480 in NTSC, 720 x 576 in PAL)
Image Frame
Rate
30 fps at full D1 resolution (NTSC)
25 fps at full D1 resolution (PAL)
Network
Protocol
Supported
TCP, UDP, HTTP, PPPoE, DDNS,DHCP,
IGMP
QoS Layer 2, 3
I/O Interface
WAN Port RJ-45 x1 (10/100base-T)
LAN Port RJ-45 x1 (10/100base-T)
Serial Port RJ-45 x1 (10/100base-T)
Analog Video
Output
Composite, BNC connector x1
Y/C, S connector x 1
YPbPr, BNC connector x 3
Isolated Digital
Output
Isolation with dry contact
Terminal blocks x 2
• Logic Level 0: 0.1 ~ 0.6 V
• Logic Level 1: 2.4 ~ 5 V
Isolated Digital
Input
Terminal blocks x 2
• Logic Level 0: 0 ~ 0.4 V
• Logic Level 1: 3.3 ~ 30 V
Environment
Dimensions
(W x H x D)
26.1 mm x 131 mm x 88 mm
(1.03” x 5.16” x 3.46”)
Weight
350 g (0.66 lb)
Power
Requirement
12 V / 0.61 A / 7.3 W
Operation Temp. 5 °C ~ 50 °C (32 °F ~ 122 °F)
Humidity RH10 % ~ 90 %
Others
Security
Password/username protection for restricted
camera access
General
Functions
• DI/O event triggered via remote
Video Server
• Built-in Web Server and network interface
Client Software
OS Supported
Win 2000, Win XP, Win 2003
Certication CE, FCC Class B
PRODUCT SPECIFICATION
Preliminary