Hardware manual

www.acti.com

Hardware Manual

Step 4: Connect the Cable(s)

1. Connect the network cable to the Ethernet port of the camera.

If necessary, connect other cable connectors (optional), like audio input/output, DI/DO, and

DC 12V power to the corresponding connectors on the camera.

2. Connect the other end of the network cable to a switch or injector. Then, connect the switch

or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection

example below.

Network

AC Power

Source

PoE Injector /

PoE Switch

Power Cable

Ethernet Cable

(Data + Power)

Ethernet Cable

(Data)

Camera

Step 5: Access the Camera Live View

See Accessing the Camera on page 31 for more information on how to access the Live View of

the camera.

Ethernet Port

Digital Input / Output (DI/DO)

and Audio Input / Output

Connector

12V Power Connector