User`s manual

1-6
1.4 Physical Description
1. Power Input
If your power input is DC12V.
2. Ethernet Port
The IP D/N PoE PTZ Camera connects to the Ethernet via a
standard RJ45 connector. Supporting NWAY, this IP D/N PoE
PTZ Camera can auto detect the speed of local network segment
(10Base-T/100Base-TX Ethernet).
3. Reset Button
Step 1: Switch off IP D/N PoE PTZ Camera by disconnecting the
power cable
Step 2: Press and continue to hold the Reset Button. Reconnect
the power cable while continuing to hold the reset button.
Step 3: Keep holding the reset button depressed around 6 seconds,
release the reset button. The unit will start up with factory default
settings.
4. Audio Input
The IP D/N PoE PTZ Camera supports audio input with earphone
jack
5. Audio Output
The IP D/N PoE PTZ Camera supports audio output with
earphone jack
6. The I/O Terminal Connector