User`s manual

enable/disable audio transmission from this PC to IP device‟s audio out

and change audio out volume. Ex: With this function enabled you can

speak to the people at the IP device site.

 STEP6: Click the [DO1] Button to set DO status by DO1 to High

(1) or Low(0). The device DO level will remain in this status until

changed by another command or device reboots.

 STEP7: Click the [DO2] Button to set DO status by DO2 to High

(1) or Low(0). The device DO level will remain in this status until

changed by another command or device reboots.

 STEP8: Click the [Setup] to exit the live view and return to

“Main Setup page”.

NOTE: If the streaming is disabled, you cannot see the live images

here.

NOTE: For all network router/switches connected to this Camera/Video

Server, be sure to use Auto Negotiation as the Network Connections

Type. This will enable the whole network to always run at the highest

possible speed.