User`s manual

www.acti.com

ACM-3001 Hardware User’s Manual

Basic Connections

Follow the procedures below to connect the IP PoE Fixed Dome Camera to the respective

apparatuses.

If you have a PoE(Power over Ethernet) supported switch or injector:

1) Connect your IP Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45

connector.

2) Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.

If your switch does not support PoE, and you are powering the camera with power

adaptor:

1) Connect the power adaptor to IP Camera

2) Connect IP PoE Fixed Dome Camera’s Ethernet port to Network switch (via RJ45

connectors).

3) Connect a PC to the Ethernet switch (via RJ45 connectors)