-channel MPEG-4 Video Encoder ACD-2100 Ver.
0 0 1. 2. 3. PRECAUTIONS Read these instructions All the safety and operating instructions should be read before the product is operated. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment. b.
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Table of Contents 0 PRECAUTIONS................................................................................................ 0-1 Trademarks ..................................................................................................................................0-1 Liability ........................................................................................................................................0-1 FCC/CE Regulation ..................................................................
11 1.
1.2 Features and Benefits This 1-channel MPEG-4 Video Encoder is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In addition, with these powerful hardware platform, excellent SDK support and powerful respective apparatuses (e.g.
powerful surveillance program is included in the package and is very free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want.
1.3 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipments / personnel, if you use a power supply with different voltage than the one included with this device. All warranty of this product will be voided in the situations above. Don’t open the housing of the product Cleaning Disconnect this video product from the power supply before cleaning.
4. If the video product does not operate normally by following the operating Instructions in this manual. Adjust only those controls that are covered by the instruction manual as an improper adjustment . Other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.
1.4 Physical Description 1. Video Input / Outpu The Video Encoder supports one analog video input and output of composite signal with BNC connectors 2. Audio Input / Output The Video Encoder supports one audio input and output with earphone jack 3. Dip Switch for Serial Port RS-485 or RS-422 pin define (default is RS-485) RS-232 pin define 4. Action LED Indicator The LED will light up after Video Encoder has successfully completed the boot process. 5.
cable Step 2: Using a suitable pointed object, press and continue to hold the Reset Button depressed. While continuing to hold the reset button depressed, reconnect the power cable. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. The unit will start up with factory default settings. 7. Terminal Blocks Pin 1~6 The Video Encoder supports two alarm input and two alarm output. DI: Logic Level 0: 0~0.4V; Logic Level 1: 3.3~30V DO: Logic Level 0: 0.1~0.
9. 11 12V 12 GND Power Input (DC +12V) Ground Pin of Power Input & RS-232 Ethernet Port The Video Encoder connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this 1-channel MPEG-4 Video Encoder can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
1.
1.6 Basic Connections Follow the procedures below to connect the 1-channel MPEG-4 Video Encoder to the respective apparatuses. 1. Connect an analog monitor to Video Encoder video out (BNC connector). 2. Connect the power adaptor to Video Encoder 3. Connect Video Encoder’s ethernet port to an Ethernet (RJ45 connectors).. 4.
1.
