Specifications

2-25
The ambient temperature at which the test is performed is
recorded. Your MS1400 uses an internal temperature sensor for
this purpose. If you prefer to use your own thermometer, you can
manually enter the temperature here.
IMPORTANT: For scheduled tests, the manual
temperature entry is used for the first interval
only. Subsequent intervals will record the
temperature as measured by the internal
sensor. For accurate measurements, your
MS1400 reads the internal temperature sensor
immediately upon power-up.
When you are ready to begin the test, press OK soft key.
Performing An Auto Test
The following screen appears when your MS1400 is performing
Auto Test measurements:
The number, type and carrier frequency of the channel currently
being measured is displayed. The bar graph indicates the
percentage of channels measured.
If you are performing a scheduled test, the time remaining until the
next interval will appear upon completion of the measurements.